Terra Cotta Cladding Support Systems

Engineered behind the terra cotta.

Terra cotta gives a façade a distinctive, enduring finish and the performance of a true ventilated rainscreen. Behind the panel, the support system has to do more than carry the load. It has to hold a consistent attachment plane, preserve the drainage and ventilation cavity, accommodate continuous insulation, and minimize thermal bridging back to the structure. CLADIATOR® CL-300 and Slotted-Z are engineered around all four.

For Architects & Engineers, it means the freedom to design in terra cotta without compromising the thermal strategy of the wall. For Developers & GCs, it means a proven support approach behind a high-performance façade. For Installers, it means a clear, adjustable plane built for predictable panel alignment.

How it works

Why Terra Cotta Demands the Right Support

Terra cotta hangs as individual units, so joint consistency and attachment accuracy define the finished elevation. At the same time, the ventilated cavity behind the panels needs room to drain and breathe. CLADIATOR® carries the exterior finish while maintaining continuous insulation and minimizing conductive heat transfer through the wall assembly.

The Numbers Behind the Panel

CL-300.

Smart-Track Cladding Support System

  • 61 lb per square foot gravity load
  • 92 to 98 percent thermal efficiency, third-party tested
  • Up to 8 inches of continuous insulation
  • Polyamide THERMAClip™ thermal isolation

 

The CL-300 gives terra cotta an adjustable clip and rail plane. The extruded aluminum Base Track and T-Track set the support, and the polyamide THERMAClip™ isolates the exterior attachment layer from the structure. The plane is leveled and plumbed from the exterior to resolve in-field imperfections in the backup wall, so panels align the way they were drawn.

Slotted-Z.

Thermally Isolated Z-Girt System

  • Low-conductivity fiberglass Z-girt
  • Continuous insulation support
  • Integrated air and moisture pathways
  • Optional ROCKETStick™ insulation securement without additional WRB penetrations

Where a fiberglass Z-girt suits the wall, Slotted-Z provides a direct, thermally isolated attachment layer behind the terra cotta. The fiberglass girt minimizes conductive heat transfer while carrying continuous insulation, integrated slots move air and moisture, and the optional ROCKETStick™ secures insulation without added penetrations through the WRB.

Terra Cotta Applications

CLADIATOR® supports terra cotta rainscreen applications including:

  • Horizontal terra cotta panels
  • Vertical terra cotta panels
  • Open-joint ventilated façades
  • Clip-attached terra cotta systems
  • Mixed-material façades that pair terra cotta with other cladding


CLADIATOR® provides the thermally isolated support system. The final panel attachment depends on the selected manufacturer, and panel weight, orientation, clip type, wind load, and spacing vary by system. Girt spacing and the full wall assembly are confirmed with the terra cotta manufacturer and CLADIATOR® during design.

Get in Touch

Whatever the finish, CLADIATOR® provides the thermally isolated support system beneath it. Tell us about your project and our technical team will help identify the right system for your façade.

Frequently Asked Questions

Can CLADIATOR® be used behind terra cotta rainscreen panels?

Yes. Both the CL-300 and Slotted-Z have dedicated terra cotta attachment details and are engineered around the selected panel system.

The CL-300 offers greater exterior adjustability and a precise attachment plane. The Slotted-Z offers a simpler fiberglass Z-girt approach with continuous insulation and integrated ventilation.

The CL-300 isolates the exterior rail with polyamide THERMAClip™ components. The Slotted-Z replaces conductive metal Z-girts with a low-conductivity fiberglass girt.

No. CLADIATOR® supplies the thermally isolated support system behind the cladding. Panel-specific attachments are coordinated with the terra cotta manufacturer.